Design Engineer III

Job Purpose The Engineering Technical Services (ETS) department ensures optimal performance for one of the world's most advanced aircraft fleets

Key Responsibilities

• Demonstrable experience in managing complex tasks and decision making in a fast-paced en vironment

• Demonstrable experience in managing complex tasks and decision making in a fast-paced en vironment.

Requirements & Qualifications

• As a Design Engineer you will be responsible to prepare، check، approve design and substantiation data for modifications and repairs on large aeroplanes in accordance with the applicable regulatory requirements، Emirates Design Organisation Handbook، and related Procedures

• Liaise with CVEs (Compliance Verification Engineer) to ensure compliance with CS-25 and other certification basis requirements

• Specific to Structures: Prepare Structural Substantiations and develop design & compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / Engineering drawings / Weight & Balance analysis / Test plans and reports / Compliance inspection plans / Equipment

• Specific to Cabin Interiors: Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / LOPA، Emergency Equipment Layout، and related Engineering drawings / Functional Hazard Assessment، System Safety Assessment / Test plans and reports / Compliance inspection plans / Equipment

• Specific to Electrical and Avionics Systems: Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as Compliance statements

• Knowledge of EASA Part 21.J and GCAA CAR 21 regulatory requirements، including CS-25، CS-26، (E)TSO، and CFR Part 25

• As a Design Engineer you will be responsible to prepare، check، approve design and substantiation data for modifications and repairs on large aeroplanes in accordance with the applicable regulatory requirements، Emirates Design Organisation Handbook، and related Procedures.

• Liaise with CVEs (Compliance Verification Engineer) to ensure compliance with CS-25 and other certification basis requirements.

• Prepare Structural Substantiations and develop design & compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / Engineering drawings / Weight & Balance analysis / Test plans and reports / Compliance inspection plans / Equipment

• Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as، Compliance statements / LOPA، Emergency Equipment Layout، and related Engineering drawings / Functional Hazard Assessment، System Safety Assessment / Test plans and reports / Compliance inspection plans / Equipment

• Prepare design and compliance documents that are necessary to demonstrate compliance with the applicable type certification basis، Operational Suitability Data (OSD)، as well as environmental protection requirements، other specifications، and standards، such as Compliance statements

• Knowledge of EASA Part 21.J and GCAA CAR 21 regulatory requirements، including CS-25، CS-26، (E)TSO، and CFR Part 25.

Benefits & Conditions

• Salary & benefits Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world

• Salary & benefits

• Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry، including discounts on flights and hotels stays around the world

We focus on fleet technical management، airworthiness، and technical support to uphold safety، reliability، cost-effectiveness، and passenger comfort

Our skilled Engineers work ly with manufacturers and vendors to advance aircraft technologies

ETS includes Fleet Technical Management، GCAA/EASA Design Organisation، Maintenance Programmes & Configuration، and Technical Publications

We drive innovation and maintain top industry standards to ensure peak operational excellence

In this role you will: Be part of design engineering activities within the terms of Emirates Design Organisation approval، as specified in the approval certificate and Design Organisation Handbook

Preparation of Classification of changes to type certificate and repairs designed by the organisation

Preparation of compliance inspections and compile certification test plans، as required

Provide on-site support during the implementation of changes/repairs

Preparation of compliance checklist and update as required

Provide support and expertise to other Technical Services personnel، working on minor/major design changes or repairs

Provide necessary support to Chief of Airworthiness، update to Design Organisation Handbook and related procedures، design data archive، design organisation contactor/subcontractor monitoring program، regulatory audits، addressing any noncompliance، quality، or compliance deficiencies

Work ly with outside vendors، MROs، regulatory authorities، and other stakeholders within the company، to create engineering solutions that exceeds expectations

Understand and interpret OEMs data (aircraft manuals، IPC/AMM/SRM/WDM/ESPM)، drawings، parts lists، reports) for both Airbus and Boeing

/ Engineering accomplishment documentation and instructions for continued airworthiness including modification bulletins، aircraft and component ICA supplements and Operational Suitability Data (OSD) supplements

Prepare Stress Reports، Structural Analysis and Fatigue & Damage Tolerance substantiation reports

Experience with advanced FEM software such as Patran/Nastran or similar

Experience with advanced CAD software such as AutoCAD/Catia or similar

Working knowledge on Cabin Systems is preferred

Knowledge or training on Cabin Safety (fireworthiness، crashworthiness، evacuation، etc.) and System Safety Assessment

Schematic and Wiring Diagrams / Harness / Wire routing installation drawings، and harness build up diagrams / Electrical load analysis (ELA) supplements / Functional Hazard Assessment، System Safety Assessment، EWIS Assessment / Test plans and reports / Compliance inspection plans / Equipment

Basic knowledge or training on Fundamental Avionics، RTCA DO-160، RTCA DO-178C، RTCA DO254 and System Safety Assessment

Experience with advanced CAD software such as AutoCAD Electrical or similar

Qualification To be considered for the role you must meet the below

Degree or Honours (12+3 or equivalent) in Aeronautical / Mechanical / Electrical/ Electronics Engineering or equivalent

At least 5 years of experience in Engineering in aerospace industry، of which at least 3 years in an EASA Part 21 or GCAA CAR 21 Design Organisation، preferably holding Major change/STC approval

Experience in Transport category Aeroplanes

Wide Body aircraft experience especially on Emirates fleet types is preferred

Experience as a Design Engineer (DE) and previous CVE experience is a plus

Experience with DOA on integrating cabin equipment (galleys، seats، wardrobes، safety equipment، other equipment) is preferred

Experience using Microsoft Office Products (Word، Excel، PowerPoint، Project) Ability to analyse and synthesise technical information for implementation in cost effective ways

Find out what it’s like to live and work in our fast-paced، cosmopolitan home city in the Dubai Lifestyle section of our website

Job Purpose

The Engineering Technical Services (ETS) department ensures optimal performance for one of the world's most advanced aircraft fleets

We focus on fleet technical management، airworthiness، and technical support to uphold safety، reliability، cost-effectiveness، and passenger comfort.

We drive innovation and maintain top industry standards to ensure peak operational excellence.

In this role you will

Be part of design engineering activities within the terms of Emirates Design Organisation approval، as specified in the approval certificate and Design Organisation Handbook

Preparation of compliance inspections and compile certification test plans، as required.

Provide necessary support to Chief of Airworthiness، update to Design Organisation Handbook and related procedures، design data archive، design organisation contactor/subcontractor monitoring program، regulatory audits، addressing any noncompliance، quality، or compliance deficiencies.

Specific to Structures

/ Engineering accomplishment documentation and instructions for continued airworthiness including modification bulletins، aircraft and component ICA supplements and Operational Suitability Data (OSD) supplements.

Prepare Stress Reports، Structural Analysis and Fatigue & Damage Tolerance substantiation reports.

Experience with advanced FEM software such as Patran/Nastran or similar. Experience with advanced CAD software such as AutoCAD/Catia or similar.

Specific to Cabin Interiors

Knowledge or training on Cabin Safety (fireworthiness، crashworthiness، evacuation، etc.) and System Safety Assessment.

Specific to Electrical and Avionics Systems

Experience with advanced CAD software such as AutoCAD Electrical or similar.

Qualification

To be considered for the role you must meet the below

Degree or Honours (12+3 or equivalent) in Aeronautical / Mechanical / Electrical/ Electronics Engineering or equivalent.

At least 5 years of experience in Engineering in aerospace industry، of which at least 3 years in an EASA Part 21 or GCAA CAR 21 Design Organisation، preferably holding Major change/STC approval.

Experience in Transport category Aeroplanes.

Wide Body aircraft experience especially on Emirates fleet types is preferred.

Experience as a Design Engineer (DE) and previous CVE experience is a plus.

Experience using Microsoft Office Products (Word، Excel، PowerPoint، Project)

Ability to analyse and synthesise technical information for implementation in cost effective ways.